FIVER FIVER AUTOPARTS CO.,LTD — Chongqing

FIVER AUTOPARTS CO.,LTD

Quality Uncertainty and the Structure of the A/C Compressor Market

When buyers cannot verify a hidden component, the market responds with tiers, certification races, counterfeit fringes and digital gatekeepers.

A market that cannot see what it is buying

An A/C compressor is a durable, hidden, hard-to-inspect component whose quality is revealed only after installation and, often, only after a season of use. This is the textbook condition for a market failure that economists have studied for more than half a century. George Akerlof showed that when buyers cannot distinguish good units from bad, the market price converges toward the value of the average unit, sellers of better goods cannot recover their costs, and the average quality of what remains can fall. He also catalogued the institutions that keep such markets from unravelling: guarantees, brand names, chain stores and licensing arrangements, each of which gives buyers a way to identify quality or to recover if they are wrong (Akerlof, 1970).

The interesting question for the compressor industry is not whether this happens. It is how quality uncertainty has shaped the structure of the market — its tiers, its certification regimes, its counterfeit fringe and its gatekeepers. Those are industry-level outcomes, and the empirical literature has something to say about each of them.

Tiers are the market's answer to unverifiable quality

The first structural response is product tiering. A study of a U.S. specialty aftermarket retailer with 3,400 stores documented how hard-part categories are organised: each subclass contains variants ordered by quality, typically good, better and best, and there is competition within the subclass rather than between subclasses. The same study noted that market shares of variants and their prices are not positively correlated, and that purchases are infrequent and typically single-unit (Mantrala, Seetharaman, Kaul, Gopalakrishna and Stam, 2006).

This is more than merchandising. Tiering converts a continuum of unverifiable quality into a small number of discrete promises that a buyer can compare, and it lets a seller price the risk of a bad unit explicitly. The economic function is the same as a warranty: it moves the cost of failure to the party best able to bear it. It also explains why catalogue index pages matter commercially: they are where a distributor converts an application into a tier decision. But tiering is also a barrier. A new entrant cannot simply enter at the top of a category; it must establish a reputation that justifies the top price, or accept the bottom tier and the margins that come with it.

Certification works — until everyone has it

The second response is certification. Its value is not fixed, and the best evidence on that point comes from an unlikely setting: eBay UK's "top rated seller" programme. Elfenbein, Fisman and McManus exploited variation in certification status within groups of near-identical listings and found that the demand benefit of certification was stronger in categories with few other aligned sellers, in more competitive markets, and for sellers with shorter records of past performance. Certification, in other words, is worth most where it is rare and where the alternative is uncertainty (Elfenbein, Fisman and McManus, 2015).

The industry implication is a cycle. A certification regime creates value for early adopters, spreads until it is table stakes, and then stops separating suppliers. At that point the market looks for a new discriminator — a wider warranty, a traceability scheme, an audit. For compressor suppliers, third-party quality certification is therefore necessary but not sufficient. Its competitive value decays, and a strategy that rests on the certificate alone will be copied.

The counterfeit fringe is a structural feature, not a nuisance

The third response is enforcement, and it exists because a fraction of the market supplies counterfeit or misrepresented parts. A study based on published Chinese court judgments traced the counterfeiting of automotive components from manufacture to sale, and made a point that matters for market structure: automotive components are hidden from view and poorly understood by lay buyers, so the informational asymmetry that counterfeiting exploits is unusually severe (Shen, Turner and Antonopoulos, 2022).

Research on the supply-chain side of the problem describes anti-counterfeiting as a set of strategies that firms adopt under a "deceptive buying environment", and uses survey data and exploratory factor analysis to relate those strategies to industry practice (Jaffery, 2018). The practical reading is that counterfeiting is not eliminated by better labelling alone. It persists because the cost of verifying a hidden component is high relative to the cost of the component, and it survives in the segments where buyers cannot or will not pay for verification. That is why counterfeit pressure is strongest at the bottom of the price distribution and in markets with weak enforcement.

The structural consequence is a split market. At one end, suppliers invest in traceability, lot records and enforcement cooperation; at the other, price competition drives verification costs toward zero. The middle is unstable, which is why distributors tend to anchor on brands and programmes rather than on individual low-cost references.

Gatekeeping has moved from parts to data

The fourth response is gatekeeping, and it is the newest. Traditionally, an original equipment manufacturer could foreclose the aftermarket for a component by controlling tooling, part numbers or dealer networks. Digitalisation adds a more powerful lever. A 2026 analysis in the Journal of Industry, Competition and Trade argues that OEM digital strategies reinforce dominance in secondary markets, particularly repair and maintenance, and assesses the European regulatory framework through the motor vehicle block exemption (Hey and Zombek, 2026).

The mechanism is worth spelling out because it changes the economics of independent supply. A study of access to digital car data shows how manufacturers had already partly foreclosed maintenance through franchised dealer contracts, and how real-time vehicle data collected on manufacturer servers allows messages to drivers that can price-discriminate and shift share toward official dealers. The authors identify at least four technical gateways that could preserve independent access (Martens and Mueller-Langer, 2020).

If diagnostic and fitment data become a gated input, then part-number accuracy alone no longer guarantees access to the market. A well-maintained BMW compressor programme is a case in point: the references are only as valuable as the application data that lets an independent workshop identify them. A compressor that fits perfectly but cannot be identified by an independent workshop's diagnostic workflow is, commercially, a harder sale. This is the modern form of the old aftermarket-power problem, and it is being fought in regulation as much as in product design.

Why the spare-parts literature now talks about repair rights

The fifth structural response is inventory and longevity policy. A review of 148 papers on spare-parts inventory management published between 2010 and 2020 noted that the field is attracting more attention partly because of the right-to-repair movement, which requires manufacturers to provide sufficient spare parts over a product's life cycle in order to reduce waste (Zhang, Huang and Yuan, 2021).

That is a striking shift. Spare-parts inventory used to be a service-cost problem; it is now a competition-policy question. For the compressor market, the implication is that the long tail of part numbers — the 1,900 references that make up a broad catalogue — is not only a commercial choice but increasingly a regulatory expectation. Suppliers that can hold or source the long tail gain a defensible position, because the alternative for a workshop is a vehicle off the road.

What the structure implies for competition

Put the five responses together and the industry looks less like a simple price ladder and more like a set of institutional layers. Tiers price risk. Certification signals quality until it saturates. Enforcement contains counterfeiting at the bottom. Gatekeeping controls access to the vehicle and its data. Spare-parts policy sets the long-run obligation to keep parts available.

For a supplier, each layer is a different place to compete. A firm can win by being the low-cost aligned tier, by owning the long tail, by controlling a technical interface, or by being the most reliable enforcement partner for distributors. It cannot easily be all of them. For the market as a whole, the uncomfortable finding is that quality uncertainty does not disappear when products improve. It migrates to whichever attribute is hardest to verify — today, increasingly, the digital interface rather than the metal.

Sources

  1. Akerlof, G. A. (1970). "The Market for 'Lemons': Quality Uncertainty and the Market Mechanism." The Quarterly Journal of Economics, 84(3), 488-500. https://doi.org/10.2307/1879431
  2. Mantrala, M. K., Seetharaman, P. B., Kaul, R., Gopalakrishna, S. and Stam, A. (2006). "Optimal Pricing Strategies for an Automotive Aftermarket Retailer." Journal of Marketing Research, 43(4), 588-604. https://doi.org/10.1509/jmkr.43.4.588
  3. Elfenbein, D. W., Fisman, R. and McManus, B. (2015). "Market Structure, Reputation, and the Value of Quality Certification." American Economic Journal: Microeconomics, 7(4), 83-108. https://doi.org/10.1257/mic.20130182
  4. Shen, A., Turner, S. and Antonopoulos, G. (2022). "Driven to Death: a Chinese Case Study on the Counterfeiting of Automotive Components." Asian Journal of Criminology, 17(3), 311-329. https://doi.org/10.1007/s11417-022-09365-8
  5. Jaffery, S. (2018). "Product-Counterfeiting can be Controlled in Supply Chains of Automotive Parts Industry." Mehran University Research Journal of Engineering and Technology, 37(4), 581-610. https://doi.org/10.22581/muet1982.1804.12
  6. Hey, F. and Zombek, M. (2026). "Digital Control and Market Power in the Automotive Sector: OEMs, Gatekeeping, and the Future of Aftermarket Regulation." Journal of Industry, Competition and Trade, 26(1). https://doi.org/10.1007/s10842-026-00468-x
  7. Martens, B. and Mueller-Langer, F. (2020). "Access to Digital Car Data and Competition in Aftermarket Maintenance Services." Journal of Competition Law & Economics, 16(1), 116-141. https://doi.org/10.1093/joclec/nhaa005
  8. Zhang, S., Huang, K. and Yuan, Y. (2021). "Spare Parts Inventory Management: A Literature Review." Sustainability, 13(5), 2460. https://doi.org/10.3390/su13052460

Every factual claim in this article is referenced to a public source; the full list is in the Sources section above.

Back to the newsroom Send an OE enquiry

More in Industry news

Enquiry Skype